This is due to a limitation in 1140/1250/1260/3500 that prevents the APs from sending Beacons with 100ms. If AP 1140/1250/1260/3500 is used together with AP1230 or AP1240, the system must be configured to use a Beacon Interval of 102ms. See Chapter 6 Appendix A CISCO WLC Configuration Reference for OT8118/8128 O The handset must be configured to use legacy mode until solution is provided. Problem with reception of aggregated frames (802.11n) This restriction has been resolved from v2.3.12. The handset supports CCXv2 (can work with Cisco infrastructure with a higher CCXĭuring EAP-FAST authentication, the handset only supports auto provisioning. The latest released version of OT8118/8128 handsets are recommended to deploy.ĪP Radio(s) 2.4 GHz (802.11b/g/n), 5 GHz (802.11a/n) However, we guarantee interoperability with all controllers listed in Comtech/PCS running software version 7.0.98.Īll tests were performed with the APs in the table, but all access points listed in the Comtech/PCS are supported.

U-APSD Unscheduled Automatic Power Save DeliveryĪll tests executed by ALU PQA team were performed on following platform. PEAP Protected Extensible Authentication Protocol MS-CHAP Microsoft version of the Challenge-handshake authentication protocol IPT 310/610 WLAN Handset, Alu branded Polycom handset 34ĪOS Alcatel-Lucent OmniAccess operating system Software 315.3 EAP-FAST USING AN INTERNAL AUTHENTICATION SERVER. 305.2 PEAP-MSCHAPV2 USING AN EXTERNAL AUTHENTICATION SERVER. APPENDIX A: CISCO WLC CONFIGURATION REFERENCE FOR OT8118/8128. 264.1 CONFIGURATION THE PARAMETERS VIA WINPDM TOOL. 16ģ.2 CONFIGURATION ON CISCO AUTONOMOUS APS. 112.2.5 Configure the Radius Server for 802.1x authentication. 62.2.1 Connecting to the Controller via a Browser. 6Ģ.2 CONFIGURATION ON CISCO WLC INFRASTRUCTURE. Configuration Guide of Cisco InfrastructureĬonfiguration Guide of Cisco Infrastructure for OmniTouch 8118/8128 WLAN Handsetġ.

Cisco autonomous ap configuration guide